| Accepted Non-Hazardous Wastewater |
|
|
|
| We do NOT accept the following wastewater |
- Highly Odorous
- High Oil/Solvent Content
- High Viscosity
- Sanitary Sources
- Biomedical Sources
|
- Plating Etching
- Surface preparation
- Alkaline or acid cleaning
- Metal finishing
- Anodizing operations
|
Must NOT be hazardous waste according to state or federal law Essentially:
- Flash point must be greater than 140F.
- pH must be greater than 2 and less than 12.5.
- Must not react to produce toxic gas. Generally, this includes cyanides greater than 250 ppm and sulfides greater than 500 ppm.
- Must not contain any substances in excess of the limits.
Cadmium 0.2 mg/l
Chromium 8.9 mg/l
Copper 4.9 mg/l
Nickel 37.5 mg/l
These are mostly metals, but include some organics, pesticides, and other toxics.
- Cannot be generated by certain specific "listed" sources or processes.
|
| Lakeland Processing has a special off-loading
station available for higher
percent solids and debris. |
